Tuffy-security 295 User Manual download pdf

Page 1 of 3 – 7/26/2012 – Rev 7/26/12

INSTALLATION INSTRUCTIONS

JEEP 1987-1995 YJ Hood Lock #295

Call (970) 564-1762 for Technical Support

Please read and fill out the enclosed warranty registration card to activate your warranty.

PARTS CHECKLIST

#1 Hood Lock

TOOLS NEEDED

• 7/16” socket and wrench

• 3/8” socket and wrench

ATTENTION:

• THIS HOOD LOCK WAS DESIGNED FOR A STOCK OEM VEHICLE, ANY MODIFICATIONS MADE TO

THE GRILLE, RADIATOR, ETC MAY AFFECT THE FIT.

PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.

1. IMPORTANT! Make sure the vehicle is parked on a flat surface, placed in park, and the emergency brake is

activated.

2. Raise the vehicle hood. Remove the (3) #3.3 OEM hood latch bolts. Reaching through the grille, lower the #3.2 OEM

hood latch and temporarily place it at the bottom of the grille. It is not necessary to remove the #3.2 hood latch from

the vehicle. (Figure 1)

FIGURE 1

3. Test various locations for access to install the #1 Hood Lock into the space between the #3.1 grille and the #3.5

radiator. Depending on your vehicle, it may be possible to install the #1 Hood Lock up from the bottom of the vehicle

1 2 3

Page 1 of 3 – 7/26/2012 – Rev 7/26/12 INSTALLATION INSTRUCTIONS JEEP 1987-1995 YJ Hood Lock #295 Call (970) 564-1762 for Technical Support Please re

Page 2 of 3 – 7/26/2012 – Rev 7/26/12 between the grille structure and the radiator. However, it may be necessary to remove the two upper radiator mo

Page 3 of 3 – 7/26/2012 – Rev 7/26/12 5. Make final adjustments for proper Hood Lock function. Move the #3.2 OEM hood latch as far to the left as po

No comments

Tuffy-security 295 User Manual