Tuffy-security 309 User Manual

Browse online or download User Manual for For the car Tuffy-security 309. Tuffy Security 309 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
INSTALLATION INSTRUCTIONS
2003+ Ford F250/F350 Crew-Cab Under Rear-Seat Lockbox #309
2003-2010 With Under Seat Metal Tray
Page 1
2011-Current With Under Seat Plastic Tub
Page 2
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
LOCKBOX #309
Tools needed for standard installation in ‘03-’10 F250/F350 with metal trays under rear seat
18mm Socket and Ratchet Torx T-40, and T-43(some cases) Sockets
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
1. Flip both rear seats up so they are secured in the upright position.
2. Locate and, using the 18mm socket, remove the OEM bolt that holds the forward edge of the tray in position, it is the second bolt
on the driver’s side at the back of the foot well. Set this bolt aside for reinstallation later.
3. Locate and remove the (6) OEM bolts that secure the factory under seat tray to the seat brackets, you will reuse these.
4. Remove the factory tray to make room for the #309.
5. Place the #309 Lockbox in the rear under seat area so that the holes (See Figure #1) in the lockbox align with the threaded holes
in the rear seat brackets, and the deeper area of the box is on the driver’s side.
FIGURE 1
6. Loosely install the (6) OEM bolts that were set aside in Step 2.
NOTE: Do not tighten the OEM bolts as some adjustability is required in the next steps.
7. Adjust the Lockbox’s side to side position so that the gap in the lids aligns with the rear seat split. This may be done by
alternately opening the Lockbox lids and raising and lowering the rear seats, and adjusting to minimize interference.
8. Once the Lockbox is in its final position, the (6) OEM bolts may be tightened, and the 18mm bolt(removed in Step 2) may be
reinstalled to prevent water from entering the cab of the vehicle.
Page 1 of 2 - 6/25/2014Rev0
Page view 0
1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 2003+ Ford F250/F350 Crew-Cab Under Rear-Seat Lockbox #309 2003-2010 With Under Seat Metal Tray Page 1 2011-Current With Und

Page 2 - FIGURE 1

Tools needed for standard installation in ‘11-Current F250/F350 with plastic storage tub under rear seat • ½” Socket and Ratchet PLEASE RE

Comments to this Manuals

No comments