Tuffy-security 286 User Manual

Browse online or download User Manual for For the car Tuffy-security 286. Tuffy Security 286 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Page 1 of 7 – 8/8/2014 – Rev A
INSTALLATION INSTRUCTIONS
JEEP 2007-2010 JK TAILGATE SECURITY ENCLOSURE #286
Call (970) 564-1762 for Technical Support
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 Lid #2 Front Panel #3 Front Panel Extension
#4 Left Mounting Bracket #5 Right Mounting Bracket
SHIPPING PACKAGE CHECKLIST
#6.1 - (10) 5/16-18 x 3/4”
CARRIAGE BOLTS
#6.2 - (10) 5/16”
WASHERS
#6.3 - (2) 5/16-18 WING
KNOB NUTS
#6.4 - (8) 5/16-18 NYLOCK
NUTS
#6.5 – (1) 49” LONG RUBBER EDGE TRIM
#6.6 – (1) 16” RUBBER EDGE TRIM #6.8 (2) 2-1/2” SMALL BULB RUBBER EDGE TRIM
TOOLS NEEDED
18mm socket and wrench (2-door model only)
15mm socket and wrench (2 or 4-door models with OEM subwoofer)
½” socket and wrench (All applications)
Drill with 3/8” drill bit (Required for 4-door model, Optional for 2-door model)
ATTENTION:
THIS ENCLOSURE WAS DESIGNED FOR A STOCK OEM VEHICLE, ANY MODIFICATIONS MADE
MAY AFFECT THE FIT INCLUDING: CARPET REMOVAL/CHANGES, SEATS, ETC.
Page view 0
1 2 3 4 5 6 7

Summary of Contents

Page 1 - ATTENTION:

Page 1 of 7 – 8/8/2014 – Rev A INSTALLATION INSTRUCTIONS JEEP 2007-2010 JK TAILGATE SECURITY ENCLOSURE #286 Call (970) 564-1762 for Technical Support

Page 2 - FIGURE 1a

Page 2 of 7 – 8/8/2014 – Rev A • On Jeep Wrangler JK vehicles with Manual Door Locks only, the rear tailgate lock must be locked manually with key in

Page 3 - FIGURE 1b

Page 3 of 7 – 8/8/2014 – Rev A INSTALLATIONS IN A 2-DOOR WITH OEM SUB-WOOFER 6. Remove the (1) #9.5 OEM Rear seat belt securing nut ON THE DRIVER’S

Page 4 - FIGURE 1c

Page 4 of 7 – 8/8/2014 – Rev A INSTALLATIONS IN A 4-DOOR WITHOUT OEM SUB-WOOFER 9. Loosely assembly the #2 Front Panel, #3 Front Panel Extension, #

Page 5

Page 5 of 7 – 8/8/2014 – Rev A INSTALLATIONS IN A 4-DOOR WITH OEM SUB-WOOFER 10. Remove or sufficiently loosen the (3) #8.1.4 OEM Sub-woofer mounting

Page 6

Page 6 of 7 – 8/8/2014 – Rev A 14. Install the #1 Lid with trim pieces into the vehicle by positioning the rear side flanges under the hardtop mountin

Page 7

Page 7 of 7 – 8/8/2014 – Rev A 16. On vehicles without the OEM sub-woofer, press the #3 Front Panel Extension as far outboard as possible to ensure a

Comments to this Manuals

No comments